How to apply our Vinyls
Make sure your bottles are clean and free of oil. You can use rubbing alcohol or nail polish remover to clean the surface, also make sure your hands are clean and free from ANY oil.
Once the surface is dry, you can apply your label.
Rub over the front and back of the vinyl sticker with the back of a teaspoon whilst applying pressure in a circular motion.
Then
Next peel the clear transfer tape from the paper backing. The vinyl word will lift off the paper and stay stuck to the clear tape.
Place the entire piece, clear tape and vinyl, on your bottle, make sure it's positioned where you want it first time.
Almost done
Rub the sticker onto the bottle with the back of a teaspoon or credit card, applying pressure as you go. I rub the sticker down for at least 15 seconds.
Once the label is set, peel back the clear tape at a 45 degree angle. The vinyl label should remain on the bottle and you can dispose of the clear tape.
Take Note
Please note should oil mess onto the lables there may be a chance that they lift from the bottle.
OH HEY, FOR BEST VIEWING, YOU'LL NEED TO TURN YOUR PHONE